Imprimer
TEKSLIDE G461
  The lowest coefficient of friction in dry applications. Suitable for the machining of bearings and other sliding parts for the food industry or for any other use in contact with soft materials such as aluminium, copper alloys, inox steel, polymeric substrates, etc. Very good wear resistance, compression resistance, high flexibility and tensile strength, excellent insulating properties. It can be used in contact with food products.

PRODUCTS

  • Moulded tubes
  • Moulded rods
  • Moulded sheets
  • Skived tapes
  • Machined parts
  • Piston rings
  • Bearing tapes
  

APPLICATIONS

  • Air Compressors
  • Wear bands
  • Automotive
  • Insulators
  • Linear Slides
  • Mechanical Textile

TECHNICAL DATA SHEET
PROPERTIES UNIT METHOD MOULDED
PHYSICAL - MECHANICAL      
Density
g/cm3
ASTM D792
1,85 - 2,05
Hardness - Shore D
/
ASTM D2240
≥ 55
Tensile strength CD
N/mm2
ASTM D4745
≥ 15
Elongation at break CD
%
ASTM D4745
≥ 250
Compressive strength at 1% deformation
N/mm2
ASTM D695
≥ 6
Deformation under load at room temperature 24hours at 13,7 N/mm2
%
ASTM D621
≤ 8
Permanent deformaton as above after releasing of 24 hours at room temeperature
%
ASTM D621
≤ 6
Dynamic Coefficient of friction ( PV = 0,7 N/mm2 •m/s)
/
ASTM D3702
0,10 - 0,20
Wear factor ( PV = 0,7 N/mm2 •m/s)
μm/h•N/mm2 •m•min
ASTM D3702
0,010 - 0,020
 
 
THERMAL
Service Temperature (min-max)
°C
/
- 200 / + 260
Thermal expansion coefficient (linear) 25 - 100°C
10-5/°C
ASTM D696
9 - 11
 
| + - | RTL - LTR